Complete CEM III/B identity
The /B subtype, 52.5 class, N class, and SR designation are all retained.
Product specificationsBlast-furnace / EN 52.5 N-SR
CEM III/B 52.5 N-SR
Blast-furnace cement · 66.0% slag
52.5 N-SR blast-furnace cement with 66.0% reported slag.
CEM III/B 52.5 N-SR pairs a documented 66.0% slag result with 53.6 MPa (approximately 7,770 psi) at 28 days in one complete EN designation.
- 52.5 N-SR blast-furnace cement orders
- Buyers specifying a documented 66.0% slag content
- Projects that require the complete CEM III/B designation
- 28-day cement-mortar strength
- ≈7,770 psi 53.6 MPa
- Results basis
- Representative product results
- Pack formats
- 42.5 kg bag · 1.5 MT FIBC
Product fit
52.5 N-SR blast-furnace cement with 66.0% reported slag.
CEM III/B 52.5 N-SR pairs a documented 66.0% slag result with 53.6 MPa (approximately 7,770 psi) at 28 days in one complete EN designation.
Certificate-backed results
Strength, setting, soundness, slag, and chemistry results come from the matched certificate.
High-slag result up front
The reported 66.0% slag result stays prominent from product comparison through the named-port pricing request.
What you’re buying
See exactly what each part of the product name means.
The designation identifies the cement family, constituents, strength class, early-strength class, and any documented performance category.
Blast-furnace cement subtype
EN cement strength class
Normal early strength class
Evidenced sulfate-resistant designation
- Standard and designation
- CEM III/B 52.5 N-SR · BS EN 197-1
- Cement type
- Blast-furnace cement
- Constituent / category
- Reported 66.0% slag · 52.5 N · SR designation
- Result profile
- Representative product results
Cement-mortar strength
Compare published strength in MPa and PSI.
Compare the available test ages in the units your team uses. MPa is the reported value; PSI is a rounded conversion.
| Test age | Source result | Approx. PSI | Reference / limit | Method |
|---|---|---|---|---|
| 2 days | 22.8 MPa | ≈3,310 psi | — | EN 196-1 |
| 28 days | 53.6 MPa | ≈7,770 psi | — | EN 196-1 |
Build a stronger pricing briefCompare cement performance across the stated test ages, then add the project mix target to the commercial brief. Representative product results support fast comparison, with the shipment MTC or COA providing the lot-specific quality record.
Complete product specifications
See the full reported product profile.
Compare setting, fineness, soundness, chemistry, and any reported constituent or compound data for this product.
01
Reported values
setting, and physical properties
4 reported values| Property | Reported result | Reference / limit | Method |
|---|---|---|---|
| Initial setting time | 125 min | — | EN 196-3 |
| Final setting time | 205 min | — | EN 196-3 |
| Soundness | 2.0 mm | — | EN 196-3 |
| 45 µm retained | 5.3 % | — | EN 196-6 |
02
Reported values
Constituent and chemical analysis
5 reported values| Property | Reported result | Reference / limit | Method |
|---|---|---|---|
| Slag content | 66.0 % | — | — |
| Sulfur trioxide · SO₃ | 2.05 % | — | EN 196-2 |
| Chloride · Cl⁻ | 0.02 % | — | EN 196-2 |
| Loss on ignition | 3.45 % | — | EN 196-2 |
| Insoluble residue | 4.16 % | — | EN 196-2 |
Published result profileRepresentative product results support fast comparison, with the shipment MTC or COA providing the lot-specific quality record.
Packing and pricing
Choose the pack that fits your operation.
Price the complete designation with your preferred pack, total quantity, timing, destination port, and FOB or CIF scope.
42.5 kg bags suit distribution; 1.5 MT FIBCs suit volume handling. Add the tonnage, timing, receiving plan, and port for a clearly scoped shipment offer.
- Choose 42.5 kg bags or 1.5 MT FIBCs.
- Add the tonnage, timing, unloading plan, and storage setup.
- Name the destination port and select FOB, CIF, or both for pricing.
Cement / pack format / destination