Skip to knowledge center content

Names & specifications

ASTM Type IS vs Type IL: slag cement and limestone cement explained

Type IS and Type IL are different blended-cement designations. Type IS identifies a Portland blast-furnace slag cement; Type IL identifies a Portland-limestone cement. Both belong to ASTM C595, but the names describe different compositions.

What is in Type IS?

Type IS contains slag as part of the manufactured cement. The slag used for cement is processed blast-furnace material: it is cooled, granulated and ground for use as a cementitious ingredient. That description does not refer to any material that happens to be called industrial slag.

Its proportion and the other characteristics of the finished cement matter. Ask for the full designation and the product data rather than assuming every slag-containing cement has identical early-strength or exposure performance.

Further detail: NRMCA CIP 30 — Supplementary cementitious materials

What is in Type IL?

Type IL contains finely ground limestone as part of the manufactured cement. The American Cement Association identifies the limestone proportion as more than 5% and up to 15% by mass for this designation. Its production involves controlling the cement as a whole, including grinding and composition. It is not an instruction to add loose limestone dust to an existing concrete recipe.

Type IL can be produced for performance comparable to Portland cement from the same source. A concrete producer should still evaluate a material change in its own mixtures. NRMCA notes that characteristics such as slump retention, bleeding, setting and finishability may change, with consequences for work timing.

Further detail: American Cement Association — Blended cements; NRMCA CIP 45 — Portland-limestone cement

What do the numbers in brackets mean?

When a blended-cement designation includes a parenthesized constituent percentage, that number describes the stated constituent content. For example, the number in a Type IL designation identifies limestone content. It is not a concrete-strength rating, a bag weight or a mixing ratio for the contractor. Check the complete designation and supporting product sheet for the particular cement.

Our Type IS (20) product has a target slag content of 20%. Check its technical sheet and the quality documents agreed for your shipment when comparing it with the cement you need.

Further detail: NRMCA CIP 45 — Portland-limestone cement; Cement Imports — ASTM Type IS (20) product page

Are IS and IL interchangeable?

Do not substitute one solely because both start with “Type I.” Read the specification, check the proposed product and confirm its acceptance for the project. Where the specification calls for special properties, keep the additional designation and supporting evidence. ASTM blended-cement descriptions can include properties such as moderate or high sulfate resistance; the base name alone is not a complete statement of every special property.

For a purchasing comparison, request the exact designation, the relevant standard and edition, recent product data, shipment documentation, packaging and the complete quoted price basis. Compare those answers with the requirements you actually need to meet.

Further detail: American Cement Association — Types of cement

Common question

Can I order Type IL cement?

Send us the full Type IL designation, quantity and destination so we can confirm availability before you order.

Sources & further reading

Get a quote for your cement order.