Caribbean Imports specifications

Cement and clinker specifications. Clearly explained.

Compare cement-mortar strength, setting and chemistry, and explore the OPC clinker analysis.

Browse by standard

Compare cements by standard.

Product comparison

Read the result with its test method.

These are cement-mortar results, with approximate psi conversions. EN and ASTM methods differ, so a measured result does not establish equivalence between standards or predict your concrete’s strength.

EN 42.5

EN 42.5 cements

Portland-composite CEM II/A-M (P-L) 42.5 R and sulfate-resistant CEM I 42.5 N-SR 5.

ProductProduct profileEarly strength28-day strengthProduct specifications
Portland-composite cementCEM II/A-M (P-L) 42.5 REN 42.5 R Portland-composite cement29.5 MPa2-day / ≈4,280 psi47.4 MPa≈6,870 psiView specifications ↗
Sulfate-resistant Portland cementCEM I 42.5 N-SR 5EN 42.5 N sulfate-resistant Portland cement · SR 520–24 MPa2-day / ≈2,900–3,480 psi44–48 MPa≈6,380–6,960 psiView specifications ↗
ASTM C595

ASTM slag cement

Type IS (20) Portland blast-furnace slag cement, tested under ASTM C109.

ProductProduct profileEarly strength28-day strengthProduct specifications
Portland blast-furnace slag cementASTM C595 Type IS (20)ASTM Type IS (20) · ASTM C109 result of 44.1 MPa at 28 days21.2 MPa3-day / ≈3,070 psi44.1 MPa≈6,400 psiView specifications ↗
EN 52.5

EN 52.5 cements

Portland-slag CEM II/B-S 52.5 N, sulfate-resistant CEM I 52.5 N-SR 3 and blast-furnace CEM III/B 52.5 N-SR.

ProductProduct profileEarly strength28-day strengthProduct specifications
Portland-slag cementCEM II/B-S 52.5 NEN 52.5 N Portland-slag cement · 59.5 MPa at 28 days24 MPa2-day / ≈3,480 psi59.5 MPa≈8,630 psiView specifications ↗
Sulfate-resistant Portland cementCEM I 52.5 N-SR 3EN 52.5 N sulfate-resistant Portland cement · SR 329.35 MPa2-day / ≈4,260 psi53.67 MPa≈7,780 psiView specifications ↗
Blast-furnace cementCEM III/B 52.5 N-SREN 52.5 N-SR blast-furnace cement · 66.0% reported slag22.8 MPa2-day / ≈3,310 psi53.6 MPa≈7,770 psiView specifications ↗

Product specifications

Finished cements. Complete specifications.

Strength, setting, fineness and chemical results, with test methods for each product.

EN 42.5

EN 42.5 cements

Product01
CEM II/A-M (P-L) 42.5 R 42.5 kg bag beside a 1.5 MT FIBC bulk bag
28-day cement-mortar strength47.4 MPa≈6,870 psi

Portland-composite / EN 42.5 R

CEM II/A-M (P-L) 42.5 R

CEM II/A-M (P-L) 42.5 R contains natural pozzolana and limestone. Available in 42.5 kg bags and 1.5 MT jumbo bags.

Early result
≈4,280 psi
2-day / 29.5 MPa
28-day result
≈6,870 psi
47.4 MPa
Test profile
Representative product results
CEM II/A-M (P-L) 42.5 R · EN 197-1
Product selection
  • Specifications naming CEM II/A-M (P-L) 42.5 R
  • Reviews that require an R early-strength class
  • Mix trials using the published matched result profile
Product02
CEM I 42.5 N-SR 5 42.5 kg bag beside a 1.5 MT FIBC bulk bag
28-day cement-mortar strength44–48 MPa≈6,380–6,960 psi

Sulfate-resistant Portland / EN 42.5 N-SR 5

CEM I 42.5 N-SR 5

Sulfate-resistant Portland cement in the EN 42.5 class, with normal early strength and the SR 5 designation.

Early result
≈2,900–3,480 psi
2-day / 20–24 MPa
28-day result
≈6,380–6,960 psi
44–48 MPa
Test profile
Manufacturer typical ranges
CEM I 42.5 N-SR 5 · BS EN 197-1
Product selection
  • Specifications naming CEM I 42.5 N-SR 5
  • Reviews requiring the evidenced SR 5 category
  • Technical checks that accept manufacturer typical ranges
ASTM C595

ASTM slag cement

Product03
ASTM C595 Type IS (20) 42.5 kg bag beside a 1.5 MT FIBC bulk bag
28-day cement-mortar strength44.1 MPa≈6,400 psi

Portland blast-furnace slag / ASTM C595

ASTM C595 Type IS (20)

Target slag content: 20%. ASTM C109 28-day test result: 44.1 MPa, approximately 6,400 psi.

Early result
≈3,070 psi
3-day / 21.2 MPa
28-day result
≈6,400 psi
44.1 MPa
Test profile
Representative product results
ASTM C595-21 · Type IS (20)
Product selection
  • Specifications naming ASTM C595 Type IS (20)
  • ASTM-based technical and tender review
  • Checks requiring the published 3-, 7-, and 28-day profile
EN 52.5

EN 52.5 cements

Product04
CEM II/B-S 52.5 N 42.5 kg bag beside a 1.5 MT FIBC bulk bag
28-day cement-mortar strength59.5 MPa≈8,630 psi

Portland-slag / EN 52.5 N

CEM II/B-S 52.5 N

28-day cement-mortar test result: 59.5 MPa.

Early result
≈3,480 psi
2-day / 24 MPa
28-day result
≈8,630 psi
59.5 MPa
Test profile
Representative product results
CEM II/B-S 52.5 N · BS EN 197-1
Product selection
  • Specifications naming CEM II/B-S 52.5 N
  • Reviews requiring an EN 52.5 N class
  • Technical checks of the matched Portland-slag result set
Product05
CEM I 52.5 N-SR 3 42.5 kg bag beside a 1.5 MT FIBC bulk bag
28-day cement-mortar strength53.67 MPa≈7,780 psi

Sulfate-resistant Portland / EN 52.5 N-SR 3

CEM I 52.5 N-SR 3

28-day cement-mortar test result: 53.67 MPa. EN 52.5 class with normal early strength.

Early result
≈4,260 psi
2-day / 29.35 MPa
28-day result
≈7,780 psi
53.67 MPa
Test profile
Representative product results
CEM I 52.5 N-SR 3 · BS EN 197-1
Product selection
  • Specifications naming CEM I 52.5 N-SR 3
  • Reviews requiring the evidenced SR 3 category
  • Technical checks using the matched compound analysis
Product06
CEM III/B 52.5 N-SR 42.5 kg bag beside a 1.5 MT FIBC bulk bag
28-day cement-mortar strength53.6 MPa≈7,770 psi

Blast-furnace / EN 52.5 N-SR

CEM III/B 52.5 N-SR

28-day cement-mortar test result: 53.6 MPa, approximately 7,770 psi.

Early result
≈3,310 psi
2-day / 22.8 MPa
28-day result
≈7,770 psi
53.6 MPa
Test profile
Representative product results
CEM III/B 52.5 N-SR · BS EN 197-1
Product selection
  • Specifications naming CEM III/B 52.5 N-SR
  • Reviews requiring the reported 66.0% slag result
  • Exposure-led engineering review of this exact identity

For cement production

OPC Clinker

Bulk supply for grinding and blending operations. Get a quote for your quantity and destination.

View clinker & specifications

Sulfate-resistant cement

Three sulfate-resistant cements.

EN 42.5Portland cement
EN 52.5Portland and blast-furnace cement

Read the data with confidence

Compare results correctly.

01

Check the age of the test.

A 2-day result and a 28-day result describe different test ages. Check the stated method and age before comparing values.

02

Keep the units in context.

MPa and psi are pressure units. Converting a value changes its units, not the test method or the cement’s classification.

03

Get your shipment’s results.

Typical ranges and representative reports describe the product. Your shipment’s mill test certificate or certificate of analysis gives the batch results.

Cement / pack format / destination

Have the spec? Name the cement.

Shared Shipping starts at 200 MT; independent shipments start at 2,500 MT. Tell us your cement, packaging, quantity and destination.

Get a price